Packaging made from cartons has been shown to be stronger than conventional products made from old newspaper
TORONTO, ON and TROIS-RIVIÈRES, QC, June 27, 2024 — A recent research project conducted by Quebec industrial innovation centre Innofibre has demonstrated that used food and beverage cartons, which are mostly made from paperboard, show great potential for the manufacture of moulded pulp packaging. At present, no manufacturer of such packaging in North America uses pulp made wholly or partly from fibres derived from recycled cartons.
Cartons come in two variants: shelf-stable cartons, also known as aseptic cartons, and refrigerated, or gable top, cartons. In addition to paper, cartons are composed of thin polyethylene coatings and, for shelf-stable cartons, an additional fine layer of aluminum. Cartons are commonly used for such products as juice, milk and milk substitutes, soups, water and wine.
Innofibre is an applied research centre renowned for its expertise in the development of products made from plant fibres. For this research, Innofibre produced pulp from post-consumer cartons obtained from a Quebec material recovery facility (MRF), which it then transformed into moulded products using two commonly used techniques: transfer moulding and thermoforming. “Our tests confirmed that recycled carton fibre pulp has similar mechanical and physical properties to virgin kraft pulp,” explains principal researcher Eric Desnoes. “This means that we can manufacture high-quality moulded products with it.” According to the researcher, the strength of carton pulp is therefore significantly higher than that of mechanical pulp, such as that obtained from old newspaper, which is the pulp most frequently used for moulded products made from recycled fibres. In addition, the research concludes that carton pulp would be particularly suitable for industrial manufacturing, given the relatively short production time of items and a shrinkage rate that does not interfere with nesting.
“Packaging made of recycled carton pulp could be used to contain or protect a wide variety of products in the food and non-food industries,” says Isabelle Faucher, Managing Director of Carton Council of Canada, which commissioned the research. The mission of the organization, which brings together four competing companies—Elopak, Pactiv Evergreen, SIG and Tetra Pak—is to work with the various stakeholders to increase the collection and recycling of these containers. The partnership with Innofibre aims to encourage the emergence of new local recyclers for cartons collected in Canada. The Council now hopes to collaborate with pulp and moulded packaging manufacturers in the country who would be willing to further explore the possibilities offered by recycled carton pulp. In particular, the Council would consider participating in the financing of additional in-house R&D and in the acquisition of new equipment.
The full Innofibre research report can be downloaded in English and French.
According to data compiled by Carton Council of Canada, around 34,500 tonnes of post-consumer cartons per year are collected through blue box and deposit-return programs in Canada, a portion of which are still recycled outside North America. As a result of the transformation of programs underway across the country under full extended producer responsibility policies, the Council expects to see an increase in the number of cartons collected and in the local recycling rate over the next few years. “In a context of declining volumes of newsprint and office paper, cartons can represent an alternative source of quality raw material for packaging manufacturers accustomed to working with recycled fibres, as well as for those seeking to increase their participation in the circular economy,” believes the Council’s Managing Director.
Correction: July 8, 2024 — In the sixth paragraph of the original version of this news release, “58,000 tonnes” was inadvertently stated as the quantity of post-consumer cartons collected per year in Canada. The correct figure is 34,500 tonnes. “58,000 tonnes” is actually the quantity of new cartons put on the Canadian market yearly by food and beverage producers. We are sorry for this error.
Other Images
- Picture of Eric Desnoes
- Picture of Isabelle Faucher
- Innofibre research team (with Isabelle Faucher on the left, next to Eric Desnoes)
- Innofibre logo
- CCC logo
- Examples of cartons
- Thermoformed (left) and transfer moulded (right) packaging made from recycled cartons
- Thermoformed tray made from recycled cartons
About Innofibre—Cellulosic Products Innovation Centre
Innofibre’s vision is to be recognized as a key player in the establishment of Quebec’s bioeconomy. Innofibre supports the innovation and diversification of biomass products and adapts pulp and paper technologies into innovative processes. Innofibre owns specialized analytical laboratories and pilot facilities unique in North America. Our partners can count on a multidisciplinary team to meet their needs and carry out applied research mandates. For more information, visit https://innofibre.ca/en.
About Carton Council of Canada
Carton Council of Canada (CCC) is a coalition of four carton manufacturers: Elopak, Pactiv Evergreen, SIG and Tetra Pak. Formed in 2010, CCC works with all stakeholders in the recycling value chain to increase carton collection and recycling across the country. For more information, visit www.recyclecartons.ca.
###
Sources: Carton Council of Canada and Innofibre
Media: Eloi Courchesne, [email protected], 514-923-3564